← 返回产品
    Hydrocarbon Solvents

    正庚烷

    正庚烷 – Hydrocarbon Solvents product from BG Petro Chemicals

    包装图片仅供示意。包装形式随报价确认。

    关于此产品

    正庚烷是直链 C7 烷烃(C7H16,CAS 142-82-5),其需求很大一部分来自制药厂和燃料检测实验室。它是一种清澈、无色、易挥发的液体,沸点约 98 °C,不与水混溶,对油、脂肪、蜡和非极性树脂有很强的溶解力。

    燃料检测人员将其作为辛烷值标度的零点:单独使用时极易爆震,与代表 100 的异辛烷调配后,构成评定汽油辛烷值的基准参比燃料。制药用户则基于毒理学考虑选用它。与正己烷不同,它在体内不会转化为具有神经毒性的二酮,且 ICH Q3C 残留溶剂指导原则将其列入最低关注类别,因此在萃取、结晶和洗涤中常被用来替代己烷。

    针对这些用途,99% 牌号限制了关键的痕量杂质:总芳烃 50 ppm、硫 1 ppm、水分 50 ppm、溴指数 50 mg Br/100 g,均为最大值。初馏点不低于 94 °C,干点不高于 99 °C,20 °C 密度为 675–690 kg/m³,赛波特颜色不低于 +28。另提供 97% 牌号,其完整规格在报价时确认。其他用途包括天然产物提取、胶粘剂和橡胶胶浆,以及实验室和色谱工作。

    BG Petro Chemicals 以 137 kg 桶或 ISO 罐箱交付正庚烷,分类为 UN 1206,第 3 类,PG II。本品高度易燃,并具有吸入危害;请按照安全技术说明书操作。现行规格、SDS 及批次文件可应要求提供。

    规格

    CAS No.142-82-5
    Molecular formulaC7H16
    99% graden-Heptane content 99% min, with the limits below
    97% graden-Heptane content 97% min; full specification confirmed with your quotation
    Saybolt colour+28 min
    Initial boiling point94 °C min
    Dry point99 °C max
    Density (20 °C)675-690 kg/m³
    Bromine index50 mg Br/100 g max
    Total aromatics50 ppm max
    Sulphur1 ppm max
    Water50 ppm max
    Packaging137 kg drum; ISO tank
    TransportUN 1206, Class 3, PG II

    应用

    Pharmaceutical process and crystallisation solventPrimary reference fuels for octane ratingNatural product extractionAdhesives and rubber cementsLaboratory and chromatographic solvent

    包装选项

    • 137 kg drum
    • ISO tank

    供应说明

    Product documentation
    Contact our team for current specifications, safety data and available batch documentation.