Our Petroleum Products
Browse bitumen, base and process oils, petroleum waxes, solvents, aromatics and petrochemical intermediates
Showing 41–60 of 66 products
Pure Benzene (Nitration Grade)
A reformate-derived benzene for chemical conversion: solidification point min 4.85 °C on an anhydrous basis, boiling within 1°C including 80.1°C and acid wash colour max 2, suited to ethylbenzene/styrene, cumene, cyclohexane, nitrobenzene and LAB plants.
Pure Toluene (Nitration Grade)
Nitration grade toluene from refinery reformate, with non-aromatic hydrocarbons capped at max 1.5 vol % and a distillation range within 1°C (including 110.6°C), serving paint and ink thinners, contact adhesives and DNT/TDI production.
Mixed Xylenes (Nitration Grade)
A blend of the three xylene isomers plus ethylbenzene, cut from reformate with an initial boiling point of min 137 °C, a dry point of max 143 °C and max 4.0 vol % non-aromatics: the slower-evaporating aromatic solvent for coatings, resins and EC pesticides.
Methanol
Methanol (methyl alcohol, CAS 67-56-1), 99% minimum, packed in 160 kg drums or ISO tanks for formaldehyde, acetic acid and MTBE producers and for process solvent users. It is toxic by all routes of exposure and its flame is almost invisible in daylight.
Methyl tert-Butyl Ether (MTBE)
High-purity methyl tert-butyl ether (MTBE, CAS 1634-04-4) at 99.0 wt% minimum with methanol max 0.05 wt%, for pharmaceutical extraction, cracking to high-purity isobutylene and gasoline octane blending. Supplied in 150 kg drums or ISO tanks.
MPG - Mono Propylene Glycol
Mono propylene glycol (MPG, propane-1,2-diol; CAS 57-55-6, EINECS 200-338-0) in industrial and USP/EP grades at typically 99.5% min assay. Its low toxicity makes it the glycol chosen over MEG wherever food, drinking water, people or animals may be exposed.
DPG - Dipropylene Glycol
Dipropylene glycol (DPG; CAS 25265-71-8, EINECS 246-770-3), an isomer mixture at typically 99.5% min purity, in industrial and low-odour fragrance grades: the standard perfume diluent and a diol for unsaturated polyester and alkyd resins.
DEG - Diethylene Glycol
Diethylene glycol (DEG, CAS 111-46-6) for industrial use: a hygroscopic solvent, natural gas dehydration glycol and polyol for polyester and polyurethane. Acutely toxic to the kidneys, it must be kept well apart from glycerine and propylene glycol.
MEG - Mono Ethylene Glycol
Mono ethylene glycol (MEG, CAS 107-21-1) goes mostly into polyester, as the diol that reacts with terephthalic acid to make PET fibre, film and bottles. Fibre grade is typically 99.9% minimum purity; industrial grade serves antifreeze and heat-transfer fluids.
MEA - Monoethanolamine
Monoethanolamine (MEA, CAS 141-43-5) is the reference amine for acid gas removal and post-combustion CO2 capture. It binds carbon dioxide chemically, so it keeps absorbing at the low partial pressures of flue gas, where physical solvents take up too little.
DEA - Diethanolamine
Diethanolamine (DEA, CAS 111-42-2) is a secondary amine for acid gas removal, with lower solvent losses than MEA, and a feedstock for diethanolamide surfactants. Its use in cosmetics is now restricted because secondary amines can form nitrosamines.
Isopropanol (IPA)
Isopropanol (IPA, CAS 67-63-0) at 99.9% minimum purity: a fast, clean-evaporating solvent for electronics and precision cleaning and for pharmaceutical, coating and ink processes, and the base that sanitiser makers dilute to about 70%. In 160 kg drums or ISO tanks.
Linear Alkylbenzene Sulfonic Acid (LABSA)
LABSA (CAS 27176-87-0) is the dark brown, viscous acid form of linear alkylbenzene sulfonate, supplied at 96% minimum active matter. Once neutralised by the formulator it becomes the main anionic surfactant in laundry powders and dishwash liquids. 215 kg drums or IBCs.
Dioctyl Phthalate (DOP)
Dioctyl phthalate (DOP, or DEHP; CAS 117-81-7) was long the reference general-purpose PVC plasticiser. It is classified in the EU as toxic for reproduction, category 1B, and listed in REACH Annex XIV, so supply depends on authorisation and a permitted end use.
Diisononyl Phthalate (DINP)
Diisononyl phthalate (DINP, CAS 28553-12-0 / 68515-48-0) is a high molecular weight PVC plasticiser. Its longer branched chains make it less volatile and harder to extract than DEHP. It is limited to 0.1% in toys and childcare articles that children can mouth.
Di(2-propylheptyl) Phthalate (DPHP)
DPHP (CAS 53306-54-0) is a high molecular weight phthalate made from a branched C10 alcohol, chosen for low volatility and migration and good electrical resistivity in PVC cable insulation. It sits outside the low molecular weight group that carries the reproductive-toxicity classification.
DOTP - Dioctyl Terephthalate
DOTP (dioctyl terephthalate, CAS 6422-86-2) is a general-purpose PVC plasticiser that is not an ortho-phthalate and is the main substitute for DEHP/DOP. It offers low volatility, good cold flexibility and good electrical properties for cable, film and flooring.
Dibutyl Phthalate (DBP)
DBP (dibutyl phthalate, CAS 84-74-2) is a fast-gelling ortho-phthalate plasticiser whose small molecule solvates PVC and nitrocellulose strongly. Classified in the EU as toxic for reproduction (category 1B) and listed in REACH Annex XIV, it is offered only where the end use is authorised in the destination market.
Dioctyl Adipate (DOA)
Dioctyl adipate (DOA/DEHA, CAS 103-23-1) is an aliphatic PVC plasticiser. Its flexible chain keeps compounds pliable to around minus 40 °C, which suits cling film, freezer bags, and cable and hose for cold climates.
Trioctyl Trimellitate (TOTM)
Trioctyl trimellitate (TOTM, CAS 3319-31-1) is a low-volatility PVC plasticiser with three ester groups and a high molecular weight. It is used for cable rated to continuous service at 105 °C and 125 °C, for automotive wiring and for medical tubing.